gebrauchte Pumpen in Sachsen, Deutschland

BRINKMANN immersion pump

• Hersteller: Brinkmann

Immersion depth: 150 mm | Immersion depth with cutting device: 165 mm | Flange: Ø 180 mm | Pump foot: 140 mm | Q: 260 l /min | H: 2.0 m | Motor: 1.1 kW | Dimensions: 405 x 210 x 180 mm

SCHMALENBERGER immersion pump

Immersion depth: 240 mm | Pump foot: à 140 mm | Flange: à 140 /180 mm | Hole circle diameter: à 160 mm | Hole diameter: à 9 mm | Q: 9.6 m³/h | P: 8.0 bar | Dimensions: 1020 x 280 x 220 mm

GRUNDFOS diaphragm metering pump

• Hersteller: Grundfos

Dosing capacity: 9 l /h | Pressure: 7 bar | Power consumption: max. 22 W | Supply voltage: 100 - 240 V | Dimensions (pump): 270 x 110 x 185 mm | Dimensions (packaging): 360 x 190 x 270 mm

Spandau pumps in immersion pump

• Hersteller: Spandau

Immersion depth: 330 mm | Fuã: ã 140 mm | Flange: ã 140/170 x 170 mm | Q max.: 60 l/min | H min.: 16 m | H max.: 86 m | T max.: 80 â ° C | Material (pump): stainless steel

SAXONIA lubricating pump with motor

Immersion depth: 90 mm | Pump diameter: Ø 50 mm | Flange diameter: Ø 95 mm | Pn: 1.6 MPa (16 bar) | Dimensions: 250 x 110 x 125 mm

MEZ emulsion pump with tank

• Hersteller: MEZ

Plunge depth: 120 mm | Pump foot: 100 mm | Flange: 130mm | Q: 25.2 l/min ( 0.42 l/s ) | Motor: 220 - 254 /380 - 440V 3AC 50Hz | Tank volume: approx. 20 l | Chassis: 2x fixed castor, 1x swivel castor, | Dimensions...

MEZ emulsion pump with tank

• Hersteller: MEZ

Plunge depth: 170 mm | Pump foot: 100 mm | Flange: 130mm | Q: 63L/min | P: 16 kPa ( 0.16 bar ) | Motor: 0.16 kW | Tank volume (total): approx. 30 l | Useful volume: approx. 25 l | Dimensions: 530 x 305 x 440mm

MEZ emulsion pump with tank

• Hersteller: MEZ

Immersion depth: 220 mm | Pump foot: 100 mm | Flange: 130mm | Q: 25.0 l/min ( 0.42 l/s ) | P: 40 kPa ( 0.4 bar ) | Motor: 220 - 254 /380 - 440V 3AC 50Hz | Usable tank volume: approx. 30 l | Dimensions: 460 x 410 ...

2004 PF Pumpen und Feuerlöschtechnik GmbH FJ 100.1S

• Hersteller: PF Pumpen und Feuerlöschtechnik GmbH

Drehzahl: 236 U/min | Besonderheit der pumpe: Der Stator kann bei Verschleiß an der Rotor durch spannen der Schrauben, an den Rotor angepasst werden, um so die Förderleistung wieder zu erhöhen. (Wichtig, nur im l...

FLENDER gear pump

• Hersteller: Flender

POLLARD submersible pump

• Hersteller: Pollard

Immersion depth: 150 mm | Foot: Ø 85 mm | Flange: Ø 122 mm

FLUX drum pump

Intake manifold: Ø 41 mm | Intake manifold length: 1000 mm | Connection pressure side: Rd 52 x 1/6 A | Hose: DN25, length approx. 1.6 m | Dimensions (assembled, without hose): 110 x 100 x 1080 mm

PAGUS gear pump

• Hersteller: Pagus

Engine: 1.5 kW

EGGER submersible pump

Engine: 2.2 KW | Dimensions: 700 x 320 x 390 mm

IWAKI dosing pump

• Hersteller: Iwaki

Dosing rate: 6.0 l /min | Engine: 0.25 kW | Dimensions: 360 x 170 x 690 mm