gebrauchte Gebläse in Deutschland

PAGUS Rectangular multi-leaf air damper

• Hersteller: Pagus

Installation length: 175 mm | Number of blades: 3 | Air passage (wing area): 500 x 700 mm | Flange (outside): 680 x 780 mm | Flange (inside): 600 x 700 mm | Torque: 30 Nm | Setting time: 135 s | Power consumption...

VEM radial fan

• Hersteller: VEM

Flow rate: 380/850 m³/h | Total pressure difference: 70 /27 kp/m² | Density: 1.2 kg/m³ | Temperature: 20°C | Impeller: Ø 250 mm | Intake opening: Ø 160 mm | Output: 140 x 140mm | Dimensions: 600 x 550 x 690mm

VEM tube fan

• Hersteller: VEM

Volume flow: 2.83 - 4.25 m³/sec | Total pressure increase: 575 - 245 Pa | Density: 1.2 kg/m³ | Temperature: -25 - 40 °C | Impeller: Ø 620 mm | Inner diameter: Ø 630 mm | Installation length: 315 mm | Dimensions: ...

DSD Radiallüfter

Lüfterrad: ca. Ø 1000 mm | Luftleistung: 6573 m³/h | N: max. 1500 U/min | Ansaugöffnung: Ø 360 mm | Ausgang: 210 x 360 mm | Abmessungen: 1750 x 1750 x 1700 mm

ABB centrifugal fan

• Hersteller: ABB

Fan wheel diameter: Ø 300 mm | Fan wheel width: Ø 120 mm | Intake opening: Ø 220 mm | Exit opening: 320 x 190 mm | Output flange: 380 x 270 mm | Dimensions: 650 x 540 x 600mm

BAUMÜLLER radial fan

• Hersteller: Baumuller

Fan wheel diameter: Ø 180 mm | Motor: 0.45 - 0.6 kW | Hole diameter: Ø 9.0 mm | Dimensions: 360 x 265 x 325mm

PAGUS centrifugal blower

• Hersteller: Pagus

Levels: 5 | Output: Ø 100 /113 mm (inside /outside) | Shaft diameter: Ø 28 mm | Wavelength: 26mm | Material: aluminum (housing, impellers, dividers) | Dimensions: 550 x 460 x 420mm

BAUMÜLLER radial fan

• Hersteller: Baumuller

Fan wheel diameter: Ø 160 mm | Motor: 0.2 - 0.3 kW | Inlet: Ø 125 mm with filter housing 300 x 210 x 100 mm | Hole diameter: Ø 8.5 mm | Pittler type: PETRA | Dimensions: 410 x 260 x 310 mm

ZIEHL-ABEGG axial fans

• Hersteller: Ziehl-Abegg

Fan wheel diameter: Ø 800 mm | Motor: 2.0 /1.25 kW | Dimensions: 970 x 970 x 300 mm

SFC axial fan

Impeller diameter: 900 mm, angle adjustable blades | Basket diameter: Ø 940 mm | Dimensions: 990 x 990 x 400 mm

VEM radial fan

• Hersteller: VEM

Impeller: Ø 160 mm | Engine: 0.37 kW | Flange outlet: 170 x 170 mm | Dimensions: 330 x 300 x 270 mm

SIEMENS axial fan

• Hersteller: Siemens

Impeller: Ø 300 mm | Engine: 0.37 kW | Dimensions: 440 x 440 x 280 mm

Fan 0.18 kW 1350 rpm

• Hersteller: Siemens

Power: 0.18 kW | Speed: 1350 rpm | Voltage: 230 /400V | Frequency: 50 Hz | Degree of protection: 55 IP | Dimensions: 47x47x25 cm

PAPST axial fan set

Wing diameter: 110 mm | Mounting dimensions: 119 x 119 x 32 mm | Dimensions: 240 x 170 x 120 mm

VEM axial fan

• Hersteller: VEM

Impeller: Ø 245 mm | Inner diameter: Ø 250 mm | Dimensions: 315 x 315 x 220 mm