gebrauchte cnc machine centres

CNC-DREHMASCHINE “MORI-SEIKI” TYPE NT3150DCG-500C

• Hersteller: Mori Seiki
• Modell: NT-3150DCG/500

Schlagwort: Machines

Dugard ECO 760 CNC Vertical Machining Centre

• Hersteller: Dugard
• Spindelkegel: BT 40

Spindle taper: BT40 | Control: FANUC 0i-MD | Spindle motor power: 5.5/7.5kW | Spindle speed: 8000rpm | Table size: 900 x 410mm | Tool change capacity: 16 | Traverses xyz: 760 x 430 x 460mm

Harrison Alpha 460 S CNC Lathe

• Hersteller: Harrison
• Modell: Alpha 460S
• Spindelbohrung: 76 millimeter

Centre height: 230mm | Swing over bed: 460mm | Swing over cross slide: 270mm | Between centres: 1500mm | Spindle speeds (3 ranges): 20-2000rpm | Spindle bore: 76mm | Spindle motor: 26kW

CNC LATHE YANG ML-55A

• Hersteller: Yang
• Modell: ML-55

Chuck size: 400mm | Swing: 720mm | Between centres: 1200mm | Maximum turning diameter: 550mm | Turret: 8 Stations | Bar capacity: 130mm | Control: FANUC 0T

CNC Lathe Wintec TC25

Colchester Tornado 300 CNC Lathe

• Hersteller: Colchester
• Modell: Tornado 300

ECHEA D1200 CNC Flat Bed Lathe

Tip height: 800 mm | Diameter on break: 1600 mm | Diameter on carriage: 1200 mm | Turning length: 6000 mm | Distance between centres: 6000 mm | 3-range spindle speed: 500 rpm | Workpiece weight between centres: 1...

Jaguar Jessey 550 22120ENC CNC Lathe

• Hersteller: Jessey

Swing over bed: 550 mm | Swing over the support: 390 mm | Swing diameter at breakout: 810 mm | Distance between centres: 3000 mm | Motor power: 11 / 15 kW | Speed range: 26 – 2400 rpm-1 (3 rows) | Tailstock quill...

Daewoo Puma 15

• Hersteller: Daewoo
• Modell: Puma 15
• Spindelbohrung: 115 millimeter

Make: DAEWOO | Control: FANUC 0T | Between centres: 1580mm | Swing over bed: 800mm | Swing over saddle: 540mm | Max. turning diameter: 660mm | Turret: 12 STATIONS | Spindle speed: 2000 RPM | Spindle bore: 115mm |...

Studer S40 CNC Cylindrical Grinding Machine

• Hersteller: Studer
• Modell: S40
• Schleiflänge: 1,600 millimeter
• Leistungsbedarf: 13.5 kilowatt

Grinding diameter: 0,2 – 240 mm | Centre height: 125 mm | Grinding length ca.: 1600 mm | Speed: 0,0001 – 10.000 mm/min | Centre distance: 1.000 mm | Swivelling range: 180° | Grinding depth: 170 mm | Turning speed...

Pfauter PE 150 CNC Gear Hobbing Machine

• Hersteller: Gleason-Pfauter
• Modell: PE150
• Breite des Gangs: 150 millimeter
• Leistungsbedarf: 40 kilowatt

Max. workpiece diameter: 150 mm | Gear width: 150 mm | Max. module: 4 | Distance cutter centre – clamping area: 10 – 160 mm | Milling slide swivelling: -/+ 45 Grad | Table diameter: 160 mm | Table bore diameter: ...

STUDER S30 CNC Cylindrical Grinder

• Hersteller: Studer
• Modell: S30

Distance between centres: 650 | Height of centres: 125 | Max. workpiece weight between centres: 130 kg (286 lbs) | Cross slide: X axis Rapid infeed | Max. travel: 255 mm (10.2″) [plunge depth 3,4 mm (0.134″)] | S...

Junker BUAJ 30 CNC Cylindrical Grinder

• Hersteller: Junker

Total power: 9 kVA | Total connected load: 10 kVA | Distance between centres: 630 mm | Axis height of centering tips: 150 mm | Workpiece weight: max. 120 kg | Working precision of machine: IT4 ISO | Grinding disc...

STUDER S30-II CNC Cylindrical Grinder

• Hersteller: Studer
• Modell: S30

Distance between centres: 650 | Height of centres: 125 | Max. workpiece weight between centres: 130 kg (286 lbs) | Cross slide: X axis Rapid infeed | Max. travel: 255 mm (10.2″) [plunge depth 3,4 mm (0.134″)] | S...

KARSTENS K33 CNC Angular Grinding

• Hersteller: Karstens
• Schleiflänge: 1,000 millimeter

Grinding length: 1000 mm | Grinding diameter: 360 mm | Centre height: 180 mm