gebrauchte torque in indo

Rexroth R911293371 + R911293186 IndraDrive C HCS02.1E-W0021-A-03 + CSB01.1N-PB

• Hersteller: Bosch

Altersfreigabe: Ohne Altersbeschränkung | Herstellungsland: Deutschland | Inhalt: 1 Stück | Gewicht: 3000 g | Mnr: R911293186 | Spannung: 3x AC 200–500 V, 50/60 Hz | Ausgang: 3x 0–U | Schnittstelle: Profibus (PB)...

Fungilab Expert R

Objektnummer: B00020648 | Objektbezeichnung: Fungilab Expert R | Viscosity reading: dynamic viscosity ( | Time to torque: target torque pre-setting device | Time to stop: target time pre-setting device | Interfac...

SCHUNK gripping swivel modules

• Hersteller: Schunk

Stroke per jaw: 8 mm | Closing force: 280 N | Rotation angle: 190° | Torque: 1.9 Nm | Dimensions: 186 x 131 x 65mm

STIEBER pinch roller clutch

• Hersteller: STIEBER

Nominal torque ( mt ): 285 Nm | Inner diameter: Ã 25 mm | Outer diameter: Ã 80 mm | Dimensions: 80 x 80 x 38mm

PAGUS mechanical clutch

• Hersteller: Pagus

Release torque: 3.5 mkp (about 35 Nm) | Groove width: 8 mm | Groove depth: 2 mm | Dimensions: Ø 120 x 145 mm

BAUTZ hybrid stepper motor

Holding torque: 4.49 Nm | Current bipolar: 6.2 A | Shaft: Ø 10 mm | Flange: 86 x 86 mm | Dimensions: 125 x 86 x 125 mm

PAGUS pinch roller clutch

• Hersteller: Pagus

Nominal torque (mt): 63 kpm (approx. 618 Nm) | Inner diameter: Ã 45 mm | Outer diameter: Ã 110 mm | Dimensions: 110 x 110 x 50mm

PAGUS pinch roller clutch

• Hersteller: Pagus

Nominal torque (mt): 160 kpm (approx. 1570 Nm) | Inner diameter: Ã 55 mm | Outer diameter: Ã 130 mm | Dimensions: 130 x 130 x 70mm

INTERAPP intermediate flange flap

Material (housing): cast iron (GGG.40) | Material (seal): Nitrilo | Installation length: 52 mm | Torque: max. 64 Nm at 5.5 bar | Control pressure: max. 8 bar | Dimensions: 410 x 210 x 165 mm

Atlas Copco compressed air angle screwdriver

• Hersteller: Atlas-Copco

Torque: 5 - 11 nm | Tool recording: 3/8 "(approx. 9.4 x 9.4 mm) | Speed: max. 1250 u/min | P: max. 7 bar | Dimensions: 325 x 55 x 48 mm

WMW clamping drive with coupling device

• Hersteller: WMW

Speed: 80 rpm | Torque (adjustable in 8 steps): 20 - 120 Nm | Dome stroke: 12 mm | Dome lifting force: 80 N | Flange diameter: Ø 160 mm | Dimensions: 365 x 270 x 160 mm

HARMONIC DRIVE installation kit

• Hersteller: HARMONIC DRIVE

Item number: 405775 | Series: CPL | Size: 32A | Reduction: 120 | Speed: max. 7000 rpm | Rated torque: 137 Nm | Shaft diameter: Ã | Flange diameter: Ã 110 mm | Dimensions (packaging): 325 x 185 x 125 mm

HARMONIC DRIVE installation kit

• Hersteller: HARMONIC DRIVE

Item number: 405776 | Series: CPL | Size: 32A | Reduction: 160 | Speed: max. 7000 rpm | Rated torque: 137 Nm | Shaft diameter: Ã | Flange diameter: Ã 110 mm | Dimensions (packaging): 325 x 185 x 125 mm