gebrauchte variable speed in Utrecht, Niederlande

Danfoss VLT Type 3003 175H3069 Frequenzumrichter 380-415V Variable Speed HV-AC

• Hersteller: Danfoss

Altersfreigabe: Ohne Altersbeschränkung | Herstellungsland: Dänemark | Inhalt: 1 Stück | Artikelzustand: Gebraucht

ALMiG Variable 150 Kompressor Schraubenkompressor 13 bar, 31,15 m3/min, 150 kw

• Hersteller: Almig
• Modell: Variable

Altersfreigabe: Ohne Altersbeschränkung | Inhalt: 1 Stück | Netto-gewicht: 3900000 g | Maße: 2300×1686×1888mm | Flow rate according to iso 1217 (annex c-1996): max 31.15 | Load hours: 54679 h

C0 - SIEG - Metalldrehmaschine

Item no: Baby Lathe | Swing over bed: 110 mm | Distance between centers: 125 mm | Hole through spindle: 10 mm | Tailstock screw: M14x1 mm | Variable speed: 100-3800 ±10% rpm | Cross slide travel: 50 mm | Motor ou...

SC4-510 - SIEG - Metalldrehmaschine

Item no: Bench Lathe | Swing over bed: 210 mm | Distance between centers model 410: 410 mm | Model 510: 510 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable s...

SC6-550 - SIEG - Metalldrehmaschine

Item no: Bench Lathe | Swing over bed: 250 mm | Distance between centers: 550 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable speed): 125-2000 ±10% rpm | Com...

SC3 - SIEG - Drehmaschinen

• Hersteller: Sieg

Item no: Mini Lathe | Schaukeln über dem bett: 180 mm | Swing over bed: 180 mm | Abstand zwischen den zentren: 400 mm | Distance between centers: 400 mm | Loch durch spindel: 20 mm | Hole through spindle: 20 mm |...

SX1P - SIEG -Fräsmaschine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

SX2.7L - SIEG -Fräsmaschine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 395 mm | Cross axis (y): 180 mm | Headstock travel (z): 290 mm | Throat: 190 mm...

SX2.3 - SIEG - Fräsmaschine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

2003 DENKA DL22N

• Hersteller: Denka-Lift
• Modell: DL22N
• Hebekraft: 200 kilogram
• Maximale Hebehöhe: 19.9 meter

Spezifikationen: Ansehen | Factsheets: Download | Reifenzustand %: 80 | Netto gewicht (kg): 2300 | Länge (m): 7.9 | Breite (m): 0.89 | Höhe (m): 2.14 | Transportlänge (m): 6.52 | Transportbreite (m): 0.89 | Trans...

C2 - SIEG - Metalldrehmaschine

Item no: Mini Lathe | Swing over bed: 180 mm | Distance between centers model 200: 200 mm | Model 300: 790x360x390 mm | Hole through spindle: 20 mm | Cross slide travel: 65 mm | Compound travel: 55 mm | Spindle t...

C3 - SIEG - Metalldrehmaschine

Item no: Mini Lathe | Swing over bed: 180 mm | Cross slide travel: 65 mm | Compound travel: 55mm | Motor output power: 350 W | Distance between centers: 350 mm | Hole through spindle: 20 mm | Spindle taper: MT3 |...

VG F-1060-3KKS

• Hersteller: VG

Sunmaster CH-2690

• Hersteller: Sunmaster

1995 Caterpillar CS433C

• Hersteller: Caterpillar
• Modell: CS-433C
• Stunden: 4,852 hour

Stunden: 4.852 | Laufwerk / bereifung: 30%