gebrauchte Gebläse in Sachsen, Deutschland

VENTIFILT centrifugal fan

Flow rate: 0.29 - 0.65 m³/sec | Total pressure difference: 1450 - 750 Pa | Density: 1.2 kg/m³ | Impeller: Ø 315 mm | Output: 200 x 160mm | Dimensions: 660 x 560 x 480mm

ILKA radial fan

Flow rate: 0.33 - 0.85 m³/sec (1200 - 3100 m³/h) | Total pressure difference: 520 - 280 Pa | Density: 1.2 kg/m³ | Temperature: -20 - +40 °C | Impeller: Ø 400 mm | Intake opening: Ø 250 mm | Output: 220 x 220mm | ...

AEG radial fan

Fan wheel: approx. Ø 480 mm | Speed: 1000 rpm | Gear ratio (belt drive): 0.71 | Intake opening: Ø 380 mm | Output: 300 x 400mm | Dimensions: 1020 x 890 x 1050mm

VEM radial fan

• Hersteller: VEM

Fan wheel: approx. Ø 600 mm | Intake opening: Ø 400 mm | Output: 340 x 340mm | Dimensions: 1250 x 1200 x 1100mm

TEMAFA radial fan

• Hersteller: Temafa

Intake opening: Ø 250 mm | Output: 255 x 255 mm /Ø 250 mm | Dimensions: 1300 x 1000 x 1200mm

VEM radial fan

• Hersteller: VEM

Flow rate: 2200/4100 m³/h | Total pressure difference: 98 /121 kp/m² | Density: 1.2 kg/m³ | Temperature: 85°C | Impeller: Ø 300 mm | Intake opening: Ø 250 mm | Output: 225 x 225mm | Dimensions: 760 x 700 x 830mm

BISTRON Radiallüfter

Lüfterrad: Ø 620 mm | Luftleistung: 3,61 m³/sek | N: max. 1680 U/min | Pw: max. 7,5 kW | Ansaugöffnung: Ø 600 mm | Ausgang: 500 x 580 mm | Abmessungen: 1500 x 1250 x 1500 mm

SIEMENS centrifugal fan

• Hersteller: Siemens

Fan wheel: Ø 300 mm | N: 2850 rpm | Motor: 0.75 kW | Intake opening: Ø 145 mm | Output: 90 x 160mm | Dimensions: 460 x 420 x 390mm

ZIEHL-ABEGG axial fan

• Hersteller: Ziehl-Abegg

Diameter: 497 mm | Voltage: 400V | Frequency: 50 Hz | Dimensions: 590 x 590 x 225

S&P duct fan

Impeller (aluminum): Ø 400 mm | Nominal width: 400 mm | Motor: 0.4 kW | Dimensions: 620 x 570 x 440 mm

CIPRES FILTR radial fan

Fan wheel: Ø 360 mm | Suction: Ø 420 mm | Dimensions: 700 x 650 x 580 mm

CERAMIC CHEMICAL Pipe fan

Shaft diameter: Ø 11 mm | Inner diameter: Ø 250 mm | Flange diameter: 305 mm | Installation length: 400 mm | Material: plastic | Dimensions: 400 x 310 x 420 mm

FANUC axial fan

• Hersteller: Fanuc

Dimensions: 320 x 190 x 110 mm

VEM axial fan

• Hersteller: VEM

Air wheel: Ø 315 mm | Inner diameter (connections): Ø 80 mm | Dimensions: 1160 x 590 x 460 mm

VEM pipe fan

• Hersteller: VEM

Impeller: Ø 395 mm | Inner diameter: Ø 400 mm | Dimensions: 450 x 450 x 300 mm