gebrauchte Gebläse in Sachsen, Deutschland

CERAMIC CHEMICAL Pipe fan

Shaft diameter: Ø 11 mm | Inner diameter: Ø 250 mm | Flange diameter: 305 mm | Installation length: 400 mm | Material: plastic | Dimensions: 400 x 310 x 420 mm

FANUC axial fan

• Hersteller: Fanuc

Dimensions: 320 x 190 x 110 mm

VEM axial fan

• Hersteller: VEM

Air wheel: Ø 315 mm | Inner diameter (connections): Ø 80 mm | Dimensions: 1160 x 590 x 460 mm

VEM pipe fan

• Hersteller: VEM

Impeller: Ø 395 mm | Inner diameter: Ø 400 mm | Dimensions: 450 x 450 x 300 mm

FANUC axial fan

• Hersteller: Fanuc

Dimensions: 200 x 135 x 46 mm

SIEMENS radial fan

• Hersteller: Siemens

N: 2760 rpm | Engine: 0.26 kW | Dimensions: 335 x 310 x 300 mm

ELEKTROR radial fan

• Hersteller: Elektror

Fan wheel speed: 2850 rpm | Fan wheel diameter: Ø 180 mm | Volume flow: 41 m³ /min | Total pressure difference: 1.2 kPa (0.012 bar) | Suction: Ø 180 mm with suction housing 330 x 198 mm | Exit: 170 x 150 mm | Fla...

HÜRNER roof radial fan

V: . 600 m³ /h | N max: 1500 rpm | Entrance: Ø 215 mm | Output: Ø 240 mm | Dimensions: 700 x 650 x 750 mm

Side channel blower 1,5 kw

Overall dimensions: 44x44x40 cm

ROSENBERG radial fan

Speed: 1525/1140 rpm | Fan wheel: Ø 450 mm | Air inlet: Ø 285 mm | Motor: 1.2 /0.71 kW | Material: stainless steel (housing), aluminum (fan), steel (galvanized, air inlet) | Dimensions: 560 x 300 x 460 mm

ROSENBERG radial fan

Speed: 1680 rpm | Fan wheel: Ø 400 mm | Air inlet: Ø 260 mm | Engine: 0.95 kW | Material: stainless steel (housing), aluminum (fan), steel (galvanized, air inlet) | Dimensions: 560 x 300 x 460 mm

Blower 690-1100 m³ /h, 0.25 kW

• Hersteller: KIPSZER

Volume flow: 690-1100 m³ /h | Power: 0.25 kW | Speed: 1400 rpm | Voltage: 220-380V | Frequency: 50 Hz

ABB centrifugal fans

• Hersteller: ABB

Fan wheel: Ø 310 mm | N: max. 1978 rpm | Suction flange: Ø 240/300 mm | Outlet flange: 400/210 mm | Fan base: 275 x 500 mm /275 x 575 mm | Dimensions: 610 x 520 x 530 mm

CIPRES radial fan

Air wheel diameter: Ø approx. 380 mm, | Inlet: Ø approx. 220 mm | Outlet: Ø approx. 245 mm | Engine: 3 kW | Dimensions: 700 x 560 x 1040 mm

MEISSNER u. Sausage radial fan

• Hersteller: Meissner

Hole size flange: 540 x 540 mm | Overall dimensions: 800 x 650 x 740 mm