gebrauchte Bearbeitungszentren in Sachsen, Deutschland

STARRAG telescopic cover

• Hersteller: Starrag

Length: 275 - 945 mm | Material: steel | Dimensions: 700 x 275 x 130 mm

HECKERT tool carrier for pallet changer

• Hersteller: Heckert

4x bolt (top): Ø 34 mm | Long hole (top): Ø 50 x 137 mm | Flange diameter (bottom): Ø 270/195/144 mm | Dimensions: 430 x 330 x 142 mm

MAZAK tailstock

• Hersteller: Mazak

Center height: 200 mm | Quill stroke: 25 mm | Pinole diameter: Ø 40 mm | Foot: 160 x 100 mm | Groove width: 18 mm | Dimensions: 285 x 100 x 245 mm

WMW tension drive

• Hersteller: WMW

Torque (adjustable in 8 steps): 20 - 110 Nm | Flange diameter: Ø 70/120/160 mm | Hole circle diameter: Ø 98/142 mm | 8x thread: M8 x 1.25 | Dimensions: 470 x 265 x 160 mm

SCHNEEBERGER Linearführungswagen mit Linearführungsschiene

• Hersteller: Schneeberger

Lochabstand: 60 mm | Tisch: 140 x 162 mm | Abmessungen: 2000 x 140 x 70 mm

Aufspannwinkel 1.255 x 1.020 mm

Aufspannfläche: 1.250 mm x 1.000 mm | Nutenbreite: 35 / 60 mm | Nutentiefe gesamt: ca. 60 mm | Nutentiefe bei 60 mm breite: ca. 28 mm | Nutenabstand: ca. 200 mm | Dicke spannfläche: ca. 100 mm | Dicke auflagefläc...

PSP Pohony slat brake

Shaft diameter: ã 32 mm | Wave songs: 51 mm | Tax voltage: 24 V DC | Dimensions (brake): 120 x 135 x 51 mm | Dimensions (packaging): 140 x 140 x 70 mm

SDK support role

Diameter: ã 60 mm | Width: 40 mm | Shaft diameter: ã 30 mm | Wave songs: 95 mm | Dimensions (individual role): 135 x 60 x 60 mm

WMW clamping table

• Hersteller: WMW

Clamping area: 425 x 165 mm | Plate thickness: 60 mm | Groove width: 12 /20 mm | Groove depth: 20 mm | Bridge width: 19 /45 /45 /19 mm | Hole spacing (fixing screws): 365 x 60 mm | 4x bore: Ø 14 /20 mm | Dimensio...

PAGUS milling spindle

• Hersteller: Pagus

Dimensions: 550 x 80 x 80 mm

MITSUBISHI brake

• Hersteller: Mitsubishi

Shaft: 36 x 36 mm | Flange diameter: Ø 225/100 mm | Dimensions: 225 x 180 x 240 mm

STAR linear carriage with rail

Table: 104 x 70 mm | Dimensions: 1050 x 70 x 60 mm

HECKERT tool gripper

• Hersteller: Heckert

Shaft diameter: Ø 30 mm | Dimensions: 340 x 120 x 90 mm | Clamping area: 400 x 400 mm | Working height: 92 mm | P: 0 - 100 bar

PAGUS bearing block

• Hersteller: Pagus

Bearing diameter (inside): Ø 84 mm | Reduction in diameter (inside): Ø 22 mm | Bearing foot: 340 x 153 mm | Material (housing): aluminum | Dimensions: 400 x 155 x 280 mm

STANKO worktable

• Hersteller: Stanko

Groove width: 25/14 mm | Groove depth: 25 mm | Dimensions: 1100 x 280 x 100 mm