gebrauchte Pumpen in Sachsen, Deutschland

RENNER submersible pump

• Hersteller: Renner

Qmax .: 200 l /min (12 m³ /h) | Hmax .: 26 mWS | Immersion depth: 270 mm | Impeller diameter: Ø 145 mm | Pump flange: 275 x 220 mm | Material: PP /FKM | Motor: 1.5 kW | Dimensions: 555 x 295 x 220 mm

SCHMALENBERGER immersion pump

Immersion depth: 240 mm | Pump foot: à 140 mm | Flange: à 140 /180 mm | Hole circle diameter: à 160 mm | Hole diameter: à 9 mm | Q: 9.6 m³/h | P: 8.0 bar | Dimensions: 1020 x 280 x 220 mm

Knorr-brake frost protection pump

• Hersteller: Knorr

Tank content: 250 cmâ³ (0.25 l) | Connection: M22 x 1.5 | Dimensions (pump): 165 x 88 x 95 mm | Dimensions (packaging): 180 x 100 x 100 mm

Spandau pumps in immersion pump

• Hersteller: Spandau

Immersion depth: 330 mm | Fuã: ã 140 mm | Flange: ã 140/170 x 170 mm | Q max.: 60 l/min | H min.: 16 m | H max.: 86 m | T max.: 80 â ° C | Material (pump): stainless steel

SAXONIA lubricating pump with motor

Immersion depth: 90 mm | Pump diameter: Ø 50 mm | Flange diameter: Ø 95 mm | Pn: 1.6 MPa (16 bar) | Dimensions: 250 x 110 x 125 mm

MEZ emulsion pump with tank

• Hersteller: MEZ

Immersion depth: 220 mm | Pump foot: 100 mm | Flange: 130mm | Q: 25.0 l/min ( 0.42 l/s ) | P: 40 kPa ( 0.4 bar ) | Motor: 220 - 254 /380 - 440V 3AC 50Hz | Usable tank volume: approx. 30 l | Dimensions: 460 x 410 ...

MEZ emulsion pump with tank

• Hersteller: MEZ

Plunge depth: 170 mm | Pump foot: 100 mm | Flange: 130mm | Q: 63L/min | P: 16 kPa ( 0.16 bar ) | Motor: 0.16 kW | Tank volume (total): approx. 30 l | Useful volume: approx. 25 l | Dimensions: 530 x 305 x 440mm

MEZ emulsion pump with tank

• Hersteller: MEZ

Plunge depth: 120 mm | Pump foot: 100 mm | Flange: 130mm | Q: 25.2 l/min ( 0.42 l/s ) | Motor: 220 - 254 /380 - 440V 3AC 50Hz | Tank volume: approx. 20 l | Chassis: 2x fixed castor, 1x swivel castor, | Dimensions...

2004 PF Pumpen und Feuerlöschtechnik GmbH FJ 100.1S

• Hersteller: PF Pumpen und Feuerlöschtechnik GmbH

Drehzahl: 236 U/min | Besonderheit der pumpe: Der Stator kann bei Verschleiß an der Rotor durch spannen der Schrauben, an den Rotor angepasst werden, um so die Förderleistung wieder zu erhöhen. (Wichtig, nur im l...

VEM drain pump

• Hersteller: VEM

Connectors: Ã 20 mm | Motor: 130 watts | Dimensions: 140 x 140 x 110 mm

SPECK coolant pump

• Hersteller: Speck

Qmax: 20 l/min | Hmax: 30 mFls | Connections: 3/4" ( inch ) | Motor: 1.0 kW | Motor base: 135 x 112 mm | Hole spacing (parallel to the shaft): 90 mm | Hole spacing (across the shaft): 112 mm | Hole diameter: Ø 9 ...

SPECK coolant pump

• Hersteller: Speck

Qmax: 20 l /min | Hmax: 30 mFls | Motor: 1.0 kW | Motor base: 135 x 112 mm | Hole spacing (parallel to the shaft): 90 mm | Hole spacing (across the shaft): 112 mm | Hole diameter: Ø 9 x 14 mm (oblong hole, across...

KSB standard pump

• Hersteller: KSB

Q: 5 - 16 m³ /h | H: 10.2 - 8.3 m | Engine: 0.55 kW | Dimensions: 490 x 260 x 320 mm

KSB submersible pump

• Hersteller: KSB

Flow rate: 0.3 - 4.4 l /sec. | Head: 30.5 - 17.1 m | Engine: 2.3 kW

SCHMALENBERGER coolant pump

Immersion depth: 55 cm | Engine: 1.1 kW | Dimensions: 84 x 30 x 34 cm