gebrauchte in Maharashtra, Indien

CNC LATHE YANG ML-55A

• gebraucht

• Hersteller: Yang
• Modell: ML-55

Chuck size: 400mm | Swing: 720mm | Between centres: 1200mm | Maximum turning diameter: 550mm | Turret: 8 Stations | Bar capacity: 130mm | Control: FANUC 0T

CNC Lathe NAKAMURA BMT 1624L

• gebraucht

• Hersteller: Nakamura

Maximum turing diameter: 330mm | Distance between center: 540mm | Spindle nose: A2-6 | Spindle bore: 52 mm | Spindle motor: 15 HP | Spindle speed: 3500 rpm

Gleason 114 Straight Bevel Gear Generator

• gebraucht

• Hersteller: Gleason-Pfauter
• Modell: 114

Cone distance: Maximum | Minimum: 0.5′ | Pitch angle, shafts at 90 deg.: 84 Deg. 18′ | Extreme ratio: 10 | Maximum pitch diameter 10: 1 Ratio | Maximum pitch diameter 1: 1 Ratio | Maximum face width: 2.5″ | Numbe...

Coniflex Bevel Gear Generator Gleason 104

• gebraucht

• Hersteller: Gleason-Pfauter

Workpiece diameter mm: 68 – 400 | Module mm: 0.5 – 15 | Face width, max. mm: 70 | No. of teeth: unlimited | Speed of work spindle slide: max. m/min 18 | Stroke rate of work spindle slide: max. rpm 80 | Diameter o...

Mitsubishi GB 25 CNC Gear Hobbing Machine

• gebraucht

• Hersteller: Mitsubishi

Max work piece diameter: 250 mm | Max cutting module: 8 Module | Axis travel: 250 mm | Radial travel: 210 mm | Max diameter: 130 mm | Max length: 230 mm | Shift: 180 mm | Speed: 150 to 1500 min-1 | Max table spee...

Horizontal Boring Machine TOS W100A

• gebraucht

• Hersteller: TOS
• Modell: W100A

Spindle diameter: 4″ | Spindle taper: Morse 5 | Out travel: 35.43″ | Max. diameter of face turning: 35.43″ | Speed range (23): 7.1 – 1120 RPM | Faceplate speed (16): 7.1 – 224 RPM | Faceplate diameter: 24″ | Clam...

Gear Hobbing Machine Pfauter PA 300

• gebraucht

• Hersteller: Gleason-Pfauter
• Modell: PA300

CNC Gear Hobbing Gleason Pfauter GP 130

• gebraucht

• Hersteller: Gleason-Pfauter
• Modell: GP130

Nominal workpiece diameter: 130 mm | Nominal module: 3 mm | Maximum axial slide travel: 250 mm | Hob swivel angle: +/- 45 | Maximum workspindle speed: 1000 rpm | Maximum hob diameter: 80 mm | Maximum hob length/t...

HWACHEON Hi ECO 45 CNC Lathe

• gebraucht

• Hersteller: Hwacheon
• Modell: Hi-Eco 45

Control fanuc: 18 iT | Chuck size: 380mm Hydraulic Chuck | Maximum swing: 800mm | Maximum turning diameter: 630mm | Maximum turning length: 2000mm | Maximum bar capacity: 117 | Spindle nose / spindle bore: A2-11″...

LIEBHERR LC 152 CNC Gear Hobbing Machine

• gebraucht

• Hersteller: Liebherr
• Modell: LC 152

CNC Gear Hobbing Pfauter PE 250

• gebraucht

• Hersteller: Gleason-Pfauter
• Modell: PE250

Module: 5 mm | Machining length: 200 mm | Control / axes: Fanuc | Max. module: 5 mm | Max. workpiece – ø: 250 mm | Table diameter: 300 mm | Distance cutter axis / table axis: 25-225 mm | Distance cutter axis / ta...

WMW SASL 125/1E Centerless Grinding

• gebraucht

• Hersteller: WMW
• Modell: SASL 125/1E

-max: 125 mm | -min: 1.5 mm | Disk-type grinding wheel width: 250 mm | Disk-type grinding diameter: 630 mm | Grinding length: 245 mm | Speed: 45 m/sec | Disk-type grinding wheel diameter: 315 mm | Number of grind...

Drill Tap Center Enshu F130

• gebraucht

• Hersteller: Enshu

Table size: 600 x 400 mm | Travel(x x y x z): 500 x 400 x 300 mm | Table load weight: 200 kg | Rapid travel speed (x x y x z): 200 kg | Number of spindle revolutions: 40 ~ 15000 rpm | Spindle taper: BT-30 | Tool ...

Enshu F160 Drill Tap Center

• gebraucht

• Hersteller: Enshu

Table size: 650x350mm | Travel(x × y × z): 600x360x300mm | Table load air volume: 250 mm | Rapid fine speed ​​(x x y x z): 60×60×60 m/min | Spindle speed: 15000 rpm | Spindle: BT30 | Number of tools installed: 24...

Kashifuji KB 400 CNC Hobbing Machine

• gebraucht

• Hersteller: Kashifuji

Max workpiece diameter: 400mm | Max pitch module: 7mm | Axial feed travel: 300mm | Max helix angle: 45° | Max hob shif travel: 150mm | Center distance between hob&table: 35~305mm | Table size: 460φ | Machine weig...