gebrauchte machine tools in Maharashtra, Indien

WMW GFL 3000 Thread Milling Machine

• gebraucht

• Hersteller: WMW
• Modell: GFL

Max. workpiece diameter: 250 mm | Threading length: 3000 mm | Max. module: 18 | Min. module: 2 | Center height over bed: 260 mm | Workpiece spindle bore: 102 mm | Bore of the collets: 100 mm | Tailstock quill str...

Hilgeland CH 3 Cold Header Machine

• gebraucht

• Hersteller: Hilgeland

Nambuk F130 Drill Tap Center

• gebraucht

Table size: 600 x 400 mm | Travel(x x y x z): 500 x 400 x 300 mm | Table load weight: 200 kg | Rapid travel speed (x x y x z): 200 kg | Number of spindle revolutions: 40 ~ 15000 rpm | Spindle taper: BT-30 | Tool ...

Drill Tap Center Enshu F130

• gebraucht

• Hersteller: Enshu

Table size: 600 x 400 mm | Travel(x x y x z): 500 x 400 x 300 mm | Table load weight: 200 kg | Rapid travel speed (x x y x z): 200 kg | Number of spindle revolutions: 40 ~ 15000 rpm | Spindle taper: BT-30 | Tool ...

Nambuk F160 Drill Tap Center

• gebraucht

Table size: 650x350mm | Travel(x × y × z): 600x360x300mm | Table load air volume: 250 mm | Rapid fine speed ​​(x x y x z): 60×60×60 m/min | Spindle speed: 15000 rpm | Spindle: BT30 | Number of tools installed: 24...

Enshu F160 Drill Tap Center

• gebraucht

• Hersteller: Enshu

Table size: 650x350mm | Travel(x × y × z): 600x360x300mm | Table load air volume: 250 mm | Rapid fine speed ​​(x x y x z): 60×60×60 m/min | Spindle speed: 15000 rpm | Spindle: BT30 | Number of tools installed: 24...

National Kayser M56 Bolt Maker

• gebraucht

Diameter range: 3-6 mm | Shaft length under head: 31 mm | Cutting length: 45 mm | Output – pieces/min: 300