gebrauchte Ventile in Deutschland

DANFOSS Thermal Temperature Control Valve

• Hersteller: Danfoss

Control range: 50 - 90 °C | Operating temperature: max. 130 °C | Sensor temperature: max. 125 °C | Kvs value: 1.9 m³/h | Dimensions (without capillary tube): 220 x 90 x 558 mm

COAX coolant valve

P: 1 - 16 bar | Socket thread: G 1 "( inch ) | Installation length: 215 mm | Dimensions: 215 x 80 x 120mm

PNEUMATIC ATLAS directional control valve

• Hersteller: Atlas

Pn: 0.5 - 16 bar | Installation length: 140 mm | Dimensions (directional control valve): 140 x 97 x 145 mm

DRÄGER TESCOM pressure regulator, pure gas regulator

• Hersteller: Dräger

Inlet pressure: max. 27 bar | Outlet pressure: 0 - 3.5 bar | Dimensions: 120 x 120 x 60 mm

MERTIK main valve

P: 0 - 8 kp/cm² (approx. 0 - 7.84 bar) | Pn: 25 kp/cm² (approx. 24.5 bar) | Control voltage: 220 V AC, 50 Hz | Nominal width: 40 mm (NW40) | Installation length: 190 mm | Connection thread: G1½" | Dimensions: 190...

EBRO sandwich flap

• Hersteller: Ebro

Width: 62mm | Valve drive: Worm gear with handwheel Type | Dimensions: 550 x 350 x 100mm

BELIMO damper drive

Torque: 40 Nm | Adjustment angle: 0 - 95 ° | Setting time: 150 s | Control: 2 - 10 V DC | Power consumption: 6.5VA /4.5W | Operating voltage: 24 V AC /24 V DC | Axle drive: 10 - 20 mm (universal clamping block) |...

GEMÜ plastic diaphragm valve

Installation dimensions: 305 mm | Dimensions: 420 x 305 x 260mm

GESTRA return temperature limiter

Installation dimension: 200 mm | Flange diameter: Ø 90 /150 mm | Bolt circle diameter: Ø 110 mm | Hole diameter: Ø 17.5 mm | Material valve body: forged steel, unalloyed ( C22.8 N ) | Dimensions: 200 x 150 x 265mm

ARI return temperature limiter

Hp: 22 bar | Pressure difference: max. 6 bar | Installation dimensions: 160 mm | Flange diameter: Ø 68 /115 mm | Bolt circle diameter: Ø 85 mm | Hole diameter: Ø 13.5 mm | Material valve housing: Steel (1.0460) |...

VEN156

KLINGER flange seals

• Hersteller: Klinger

Material: C - 4409 | Material thickness: 2 mm | Dimensions (packaging): 770 x 730 x 40 mm

ARI shut-off valve

• Hersteller: Ari

Installation dimensions: 310 mm | Flange diameter: Ø 140 /200 mm | Pitch circle diameter: Ø 160 mm | Hole diameter: 8x Ø 17.5 mm | Hand wheel: Ø 175 mm | Dimensions: 310 x 200 x 330mm

KLINGER flange seals

• Hersteller: Klinger

Material: C - 4409 | Material thickness: 2 mm | Diameter (outside /inside): Ø 1175 /1003 mm | Dimensions (packaging): 1250 x 1250 x 50 mm

HERION solenoid valve

Pressure range: 0 - 6 bar | Installation length: 120 mm | Connections: 1" ( inch ) | Control magnet: Order number | Coil: 24VDC 39W/VA | Dimensions: 120 x 100 x 265mm