gebrauchte Ventile in Deutschland

MECAFRANCE flange ball valve with pneum. drive

Installation dimensions: 230 mm | Hole diameter: Ã 18 mm | Control pressure: max. 10 bar | Dimensions: 450 x 255 x 190 mm

SAMSON pneumatic control valve

• Hersteller: Samson

Installation dimensions: 180 mm | Hole diameter: Ã 18 mm | Valve housing material: gray cast iron (Gg-25) | Dimensions: 570 x 390 x 250 mm

MECAFRANCE flange ball valve with pneum. drive

Installation dimensions: 310 mm | Hole diameter: Ã 18 mm | Control pressure: max. 10 bar | Dimensions: 560 x 310 x 220 mm

SAMSON 3-Wege-Stellventil

• Hersteller: Samson

Einbaumaß: 180 mm | Lochdurchmesser: Ø 18 mm | Material ventilgehäuse: Grauguss ( GG-25 ) | Abmessungen: 570 x 390 x 250 mm

ROTORK handheld programming device

Dimensions: 153 x 47 x 30 mm

Coax coolant valve

P: 0 - 16 bar | Muffen thread: G 1/2 "(customs) | Installation of: 160 mm | Dimensions: 160 x 50 x 77 mm

VEN763

GARDNER - DENVER pressure valve

• Hersteller: Gardner Denver

Dimensions: 118 x 118 x 63 mm

INTERAPP intermediate flange flap

Material (housing): cast iron (GGG.40) | Material (seal): Nitrilo | Installation length: 52 mm | Torque: max. 64 Nm at 5.5 bar | Control pressure: max. 8 bar | Dimensions: 410 x 210 x 165 mm

COAX coolant valve

Dimensions: 160 x 105 x 50 mm

KROMSCHRÖDER safety shut-off valve

Installation length: 91 mm | Internal connection thread: 1" (inch) | Set response pressure: 120 mbar (0.12 bar) | Adjustable response pressure: 100 - 210 mbar (0.1 - 0.21 bar) | Pmax.: 4 bar | T: -15 °C - +60 °...

DANFOSS Thermal Temperature Control Valve

• Hersteller: Danfoss

Control range: 50 - 90 °C | Operating temperature: max. 130 °C | Sensor temperature: max. 125 °C | Kvs value: 1.9 m³/h | Dimensions (without capillary tube): 220 x 90 x 558 mm

COAX coolant valve

P: 1 - 16 bar | Socket thread: G 1 "( inch ) | Installation length: 215 mm | Dimensions: 215 x 80 x 120mm

PNEUMATIC ATLAS directional control valve

• Hersteller: Atlas

Pn: 0.5 - 16 bar | Installation length: 140 mm | Dimensions (directional control valve): 140 x 97 x 145 mm

DRÄGER TESCOM pressure regulator, pure gas regulator

• Hersteller: Dräger

Inlet pressure: max. 27 bar | Outlet pressure: 0 - 3.5 bar | Dimensions: 120 x 120 x 60 mm